Install HAProxy on Percona XtraDB custers

Spread the love

I have posted how to install Percona XtraDB cluster previously. And I want to show how to use the DB clusters from web server.

To use the multiple nodes from one or multiple web servers, it need load balancer. There’s several LB but HAProxy is one of most popular and easy to install.
Here’s documentation from Percona how to set up HAProxy on Percona XtraDB clusters.

Let’s say there are Percona DB nodes synced each other and one web server.

10.7.13.81 web
10.7.13.91 node1
10.7.13.92 node2

And I would like to make web server connected to 2 db nodes.

Config and install HAProxy on web server

Download and Install HAProxy on web server.

sudo add-apt-repository ppa:vbernat/haproxy-1.8
sudo apt-get update
sudo apt-get install haproxy

Then config HAProxy.

sudo vi /etc/haproxy/haproxy.cfg

Then add this below. We will use port 3307 and localhost to connect Mysql nodes. And HAProxy will routes the traffic to db nodes using port 3306.

frontend pxc-front
  bind *:3307
  mode tcp
  default_backend pxc-back

frontend stats-front
  bind *:80
  mode http
  default_backend stats-back

frontend pxc-onenode-front
  bind *:3306
  mode tcp
  default_backend pxc-onenode-back

backend pxc-back
  mode tcp
  balance leastconn
  option httpchk
  server node1 10.7.13.91:3306 check port 9200 inter 12000 rise 3 fall 3
  server node2 10.7.13.92:3306 check port 9200 inter 12000 rise 3 fall 3

backend stats-back
  mode http
  balance roundrobin
  stats uri /haproxy/stats
  stats auth pxcstats:secret

backend pxc-onenode-back
  mode tcp
  balance leastconn
  option httpchk
  server node1 10.7.13.91:3306 check port 9200 inter 12000 rise 3 fall 3
  server node2 10.7.13.92:3306 check port 9200 inter 12000 rise 3 fall 3 backup

Install clustercheck on nodes

Install Clustercheck on each db nodes. Clustercheck is checking mysql health and display the status on web port 80. So that HAProxy knows which node is live and available.

First create clustercheckuser on mysql.

GRANT PROCESS ON *.* TO 'clustercheckuser'@'localhost' IDENTIFIED BY 'clustercheckpassword!'
FLUSH PRIVILEGES;

Then download clustercheck from git repository and place into /usr/bin/clustercheck on node server.

git clone git@github.com:olafz/percona-clustercheck.git
mv  /root/clustercheck /usr/bin/clustercheck

The edit the downloaded file.

vi /usr/bin/clustercheck

Here’s important part, there’s typo in the programming where the mysql username and password recorded. Fix it like below, you can change the user name and password but it should be matched with the mysql user information created above. For me, this took an hour to find out this bug. No body reported this bug on the git repository although this is at least 3 years old.

MYSQL_USERNAME="${MYSQL_USERNAME:-clustercheckuser}"
MYSQL_PASSWORD="${MYSQL_PASSWORD:-clustercheckpassword!}"

Add clustercheck in mysqlchk

Configure mysqlchk file and designate where is clustercheck file located. (/usr/bin/clustercheck)

vi /etc/xinetd.d/mysqlchk
# default: on
# description: mysqlchk
service mysqlchk
{
        disable = no
        flags = REUSE
        socket_type = stream
        port = 9200
        wait = no
        user = nobody
        server = /usr/bin/clustercheck
        log_on_failure += USERID
        only_from = 0.0.0.0/0
        per_source = UNLIMITED
        
}

Install xinetd

xinetd is service where we can monitor using port 80. Add mysqlchk service in the xinetd.

vi /etc/services

Then searching for xinetd and add after below.

mysqlchk    9200/tcp    # MySQL check

We need to install xinetd if it is not installed.

sudo apt-get update -y
sudo apt-get install -y xinetd

Start xinetd using below command.

sudo service xinetd start

You can check health status of nodes from web browser, port 9200.
http://10.7.13.91:9200/
http://10.7.13.92:9200/

Make sure the message saying: Percona XtraDB Cluster Node is synced.
If it says Percona XtraDB Cluster Node is not synced. then check if the clusteruser login information matched with mysql user and credential on the file (/usr/bin/clustercheck)

You can also check through terminal.

curl http://10.7.13.91:9200/

Connectivity from web server

From web server, check if the connection to db node is working through port 3306.

mysql -uyourmysqluser -p -P 3306 -h 10.7.13.91 -e "show variables like 'wsrep_node_name';"

If there’s no problem, also check connection using port 3307, through HAProxy.

mysql -uyourmysqluser -p -P 3307 -h 127.0.0.1 -e "show variables like 'wsrep_node_name';"

If everything works fine, you will see below and now mysql is connected using host 127.0.0.1 and port 3307.

Facebook Comments

Published by

Titus Choi

I love technology. Working for information technology. Interested in AVR technology. Playing with RC stuff.